Logo

Statutory safety requirements for a forklift

At AG Trucks, you can be sure that our forklifts meet all statutory safety requirements and inspection regulations. It is nevertheless important to know what these requirements are, so that you can check them regularly while the forklift is in use. Forklift accidents still happen, sometimes with serious consequences. Regularly checking these safety requirements helps prevent them. Below, we outline the main requirements.

General requirements for a forklift

When buying a forklift, it is important to check that the machine meets the applicable statutory safety requirements. There are many requirements, but we highlight the main ones:

  • The markings and symbols on the forklift must be clearly legible. This mainly concerns the load chart showing the maximum load on the forks and the symbols on the controls.
  • The forklift must have a working horn and a seat belt or safety restraint.
  • The forklift must have an emergency stop that allows the driver to switch off the engine immediately.
  • Forklifts used outdoors and on public roads must have protection against wind and rain, as well as lighting and signalling that meet the standards of the Dutch Road Traffic Act.
  • Forklifts must have an operator presence detection system so that they cannot be used when no driver is seated.
  • Warning signals must be clearly audible and easy to recognise.

Safety requirements for combustion engines and electric forklifts

One of the main requirements for forklifts used indoors is that they must not have a diesel engine. This is strictly prohibited because of the carcinogenic substances in the exhaust gases. If you need a forklift for indoor use, choose an electric forklift. A departure from this rule is only permitted from a lifting capacity of four tonnes, and only then may a combustion engine be used with the appropriate provisions. The following points also require attention:

  • Combustion engines and other parts that become very hot must be adequately guarded to prevent burns.
  • Batteries must have lifting points to make them easy to replace.
  • LPG forklifts are preferred over diesel forklifts.

Safety requirements for the forks and load

There are also requirements for the forks and the load they carry. These rules help prevent accidents and technical faults during use. The main fork safety requirements are:

  • The forks must have end stops so that they cannot slide off or become detached.
  • When parking, the forks must be lowered as close to the ground as possible so that the forklift can be left safely.
  • Materials handling equipment must have a lowering speed limiter to ensure that the forks descend slowly and under control if a hydraulic hose breaks.

The following safety requirements apply to the load:

  • A sturdy overhead guard must protect the driver against falling objects.
  • The forklift must have a load backrest to prevent parts of the load falling backwards when the mast tilts back.
  • The forklift must provide effective protection against fingers and limbs being trapped during use.

Is a forklift certificate mandatory?

Formally, a certificate is not mandatory when you need to drive a forklift for work. You must, however, have sufficient knowledge to work safely and safeguard everyone in the company. You can acquire this knowledge through training or a course, for example. This covers safe operation as well as forklift maintenance.

Is a forklift inspection mandatory?

In many situations, a forklift inspection is mandatory to keep materials handling equipment safe to use. Under the applicable regulations, a forklift must be checked periodically for its technical condition and safety. An inspection checks items such as brakes, hydraulics, lights, forks and safety devices. Regular maintenance and inspections help prevent defects and downtime while supporting a safe working environment for drivers and other employees in warehouses and industrial settings.

Other safety requirements

In addition to the above, the driver must have good visibility. The driver must be able to monitor the surroundings and the load at all times. Mirrors must be correctly adjusted and the forklift must have sufficient, suitable lighting. Neither the overhead guard nor the load should ever obstruct the driver’s view.

Choose safe machines and dependable service

Working safely with a machine starts with reliable equipment and correct use in accordance with the applicable safety regulations. Attention to inspections, maintenance and training reduces the risk of faults and workplace accidents. Contact us for advice or a quotation without obligation.

Explore our range of inspected forklifts